Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.
Each product is visually inspected for defects using a light source and again prior to loading.
Installation Instructions:
- Inspect all tanks before installation as damage may occur during transport
- Ensure that the tank is fully supported
- Use a hole saw to drill holes in the tank
- The centre of the float valve should be 38mm from the top of the tank
- Do not install the tank close to a heat source such as a light or heater
Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.
Options
- Lid
- Drip Tray
LENGTH:
1,100mm (43.3″)
WIDTH:
570mm (22.4″)
HEIGHT:
530mm (20.9″)
CAPACITY:
197 Litres (43 Gallons)
WARRANTY:
1 Year on Manufacturing Defects